This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24 in. (Note: If a material sample does not meet the minimum thickness required, the sample should be reinforced on the back with more of the same material.)
- For Shore D hardness testing
- Ideal for use with hard rubber, hard resin, acrylic, glass, thermoplastic, etc.
- Handheld, portable, digital measuring device
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade
- Large, easy-to-read display
- Hold functionality
Measurement Area | 0 ... 100 Shore D |
Resolution | 0.5 Hardness - Grade |
Accuracy | ± 2 Hardness - Grade |
Depth of Indentation | 0 mm ... 2.5 mm / 0 in ... 0.01 in |
Pressure Force | 5 kg / 11.02 lbs |
Indenter | 30° |
Power Supply | 1 x 1.5V (SR44) |
Included Accessories | 1 x PCE-DD-D Durometer, 1 x Case, 1 x Battery, 1 x User's manual |